- 5 -
- 4 -
summit
™
SS-P TRIPOD KIT
Control pan and tilt
action with the handle.
Plate Angle Lock
Attaching Optics to the Tripod
1. Flip the plate lever lock
outward and remove the
quick-release plate.
2. Attach the plate to
your optic or camera. Be
sure to tighten the tripod
mount bolt from the
bottom side of the plate.
3. Place the quick-release
plate back into the plate
holder. Flip the plate
lever fully back against
the quick-release plate so
your optic rests securely
in the holder.
Quick-Release
Plate
Flip the plate lever to lock/unlock plate.
Plate Lever
Lock
Tripod Mount
Bolt
B
ASIC
A
DJUSTMENTS
Adjusting the Pan Head
The Summit SS-P features a 3-way pan head that allows you to
quickly follow the action and easily adjust your viewing angle. For
camera use, this head allows you to choose between horizontal and
vertical plate alignments.
Pan and Tilt Action
You can control all of the pan and tilt action with just one hand. To
make any horizontal or vertical adjustments, twist the handle counter-
clockwise to free the pan
head’s movement. When in
desired position, twist the
handle clockwise to lock.
Caution
To prevent unnecessary damage to your optics, take a few seconds to
remove your optic from the tripod before you move to a new location.
Spotting scopes and other optics may become damaged if carried
while attached to the tripod. The quick-release plate makes this
easy—and quick!
TIP:
Purchase additional quick-release plates for your optics so it is
easy for you to switch equipment.
Summary of Contents for Summit SS-P
Page 1: ...summit SS P TRIPOD KIT...
