P-10M ASSEMBLY
Step 1 (foot)
Attach the front foot (7) to the frame using the bolt (3) and washer (4).
Step 2 (foot)
Attach the rear foot (2) to the frame using the bolt (3) and washer (4).
Step 3. (pedals)
attach the pedals (76R/76L) into the crank arms (70R/70L), each pedal
is marked with the letter R(right) or R(right) to denote the side of the bike
they are on. NOTE: the right hand crank is on the same side as the
chain cover (78R). Be careful to align the threads correctly to avoid any
damaged. A little grease on the thread should help the pedals to screw in
easily and correctly, tighten using a 15mm spanner, both pedals threads
should tighten towards the front of the bike.
STEP 1
STEP 2
STEP 3