background image

11

English

During the off-season or after extended periods of non-use, you may 
choose to store your heater. To ensure long life of the product, it is 

recommended to store your heater by following these instructions:

1.

 Unplug power cord and 

bundle loosely.

2.

 Cover, or place back in 

retail carton if available. 
This prevents heater from 
accumulating dust over time.

3.

 Store heater in cool and 

dry location.

RESETTING YOUR VORNADO HEATER

Your Vornado Heater has a multilevel safety shut-off system designed 

to prevent overheating. Overheating may occur when the inlets or 
outlet are blocked. If this happens, the safety shut-off system cuts 
power to the heater and you must manually reset the heater.

1.

 Power heater off, then unplug power cord.

2.

 Remove any obstructions.

3.

 Wait 5–10 minutes, allowing heater to cool down.

4.

 Plug in power cord and place heater in desired position.

5.

 Press Power button On. Your Vornado Heater should now 

function normally. 

Note:

 If the safety shut-off system 

repeatedly shuts off your heater or if it 
will not reset after following the above 
procedure, call Vornado Consumer 
Services Department toll-free at
1-800-234-0604.

STORAGE

RESET HEATER

Cleaning is recommended before storage.

DISPOSAL

Dispose of all packaging 
materials in an environmentally 
responsible manner.

Summary of Contents for MVH















Reviews: