12
English
1.
Remove the 3 screws located in between
the ribs of the inlet grill at roughly 10, 2,
and 6 o’clock positions. Screw locations are
also indicated with an arrow* (
) on the
circulator.
Do Not remove the 2 screws
on the pivot arms.
Release the Front Grill
Clips located at the 2, 5, 7 and 10 o’clock
positions.
2.
Dust or wash Front Grill with a mild dish-
washing soap. Do not place grill in the
dishwasher. The excessive heat can distort
the plastic.
3.
To reattach - align the Front Grill Clips with
the holes and firmly snap each clip back
into place. Replace all the screws.
*Model 753 does not have arrow indicators.
CLEANING
GRILL REMOVAL (MODELS 533, 633, 683, 753)
Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons, power off and unplug the circulator before removing grill.
Front Grill Clip
Front Grill Clip
Front Grill Clip
Front Grill Clip
Screw
Screw
Screw
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grill and Air Inlets.
Note:
The motor
is permanently
lubricated and
requires no oiling.