61
1. Enable the
Auto SMS Reply
located at the top. This parameter is a global for all channels. When
this parameter is enable, GoIP will check the content of each SMS. If the content matches the
Trigger String for an SMS Reply
, GoIP then creates a message with the content equals to
Reply
Content
+ the SIM card phone number of the sender. This message is then sent back to the
sender.
2. Set
Trigger String for an SMS Reply
= the
SMS Content
. This SMS Content is the message content
of the sender.
3. Set
Reply Content
=
Text before SIM Phone Number
. This can then enable the sender to be able
to retrieve the SIM Phone Number.
4. Set
SMS Service Number
= the phone number of another GoIP channel.
5. Set
SMS Content
=
Trigger String for an SMS Reply
6. Set
CID of the SMS Response
= the phone number of another GoIP Channel (same as the one set in
SMS Service Number
).
7. Set
Text before the SIM Phone Number
=
Reply Content
5.4.11 Backup / Restore
The device configuration can be backup or restore via this page. Click [Backup / Resotre Confguration]
to access the page shown below.
To backup the device configuration, just click [Save] in the Backup Configuration section. If a password
is required when restoring a saved configuration, enter a password before the backup.
To restore a saved configuration, choose the configuration file in the Restore Configuration section and
then click [Restore]. Enter the password if required.
Summary of Contents for GoIP
Page 26: ...26 ...