before sleeping mode, screen will display
the prompt “NEW Coil YES/NO” on
interface; Press the fire button to recover
display form sleep mode.
I. Computer customization
:
You can do the following customization
operations
via the voopoo Firmware: Prompt
page, Temperature coefficient, temperature
curve, wattage curve, increase/increase coil
type and device upgrade etc.
J. When the device is connected to an
external power supply (5V) using the USB
charging port, it will enter charging mode.
Charging mode of the first 10s, the battery
small icon will run as the battery charging
which shows that charging began. With
10s without any operation, the device will
enter power saving mode, and the
full-screen will display battery power as a
large icon running. When the power is full,
the icon will be seen as below.
8