DVR User Manual
36
Advance settings are as follows:
Step 1: Enter into Menu
Setup
P.T.Z
Advanced tab. Refer to Fig 4-35:
Step 2: In the Advanced tab, click preset “Setting” button to see a dialog box as Fig 4-36:
Fig 4-35 P.T.Z Configuration-Advanced Fig 4-36 Advanced-Preset
Step 3: In the preset setting tab, while clicking Setting button, a dialog will
pop-up as Fig 4-37:
User can control the dome by rotating up, down, left, right and adjust
the rotating speed zoom, focus and iris of the dome;
Select the serial number of the preset point. Click
button to
enable the PTZ wiper and click
button to enable the PTZ light. Fig 4-37 Preset Setting
Note
: PTZ must support wiper and light, these two functional buttons can take effect. At the same time these two buttons are just available
when selecting PELCOP or PELCOD.
Click Save button to save the settings, click
icon to hide the tool
bar, right click to view the toolbar again; click
icon to exit the current
interface.
In the preset interface, click OK button to save the setting; click Exit
button to exit the current interface.
Step4: In the Advanced tab, while clicking cruise “Setting” button, a dialog
box will pop-up as Fig 4-38: Fig 4-38 Cruise Setting
VOOK
