6
TROUBLESHOOTING
PROBLEM
INDICATOR
SOLUTION
No sound
Red transmitter indicator is not flash
Slide transmitter POWER ON/OFF
switch to ON position. Make sure battery
is inserted properly, observing battery (+
/ -). If battery is inserted properly,
replace with fresh battery.
No sound
Red transmitter indicator is flash.
Slide transmitter MUTE/ON switch to
ON position.
No sound
Red receiver indicator POWER light off.
Make sure AC adapter is securely
plugged into electrical outlet and into DC
input connector.
Make sure AC electrical outlet works
and supplies proper voltage.
No sound
Receiver signal indicators A/B lights
glowing.
Turn up receiver volume control.
Confirm that the output connections
from the receiver to the external
equipment are secure.
No sound
Receiver signal indicators A/B lights off.
Transmitter and receiver POWER light
glowing.
Confirm transmitters and receivers
frequencies match. Move transmitter
closer to receiver.
Sound level differs from level of a
cabled instrument.
Receiver signal indicators A/B lights
glowing.
Adjust transmitter gain level to
compessary.
Adjust receiver volume as necessary.
Distortion level increases gradually
Receiver signal indicators A/B lights and
transmitter LOW BATTERY light
glowing
Replace transmitter battery
Bursts of noise or other audible
radio signals present.
Signal indicators A/B/ lights on.
Identify potential sources of
interferences (other RF-sources) and
turn off, remove or use a wireless
system operating on a different
frequency.
Momentary loss of sound as
transmitter is moved around
performing area.
Receiver signal indicator A/B lights of
when sound is lost
Reposition receiver and perform walk-
through test again. If audio dropouts
persist, mark “dead” spots and avoid
them during performance.
TECHNICAL SPECIFICATION
WM73C
WM73
WM73H
Ref.nr: 179.203
179.206
179.209
Frequency range
863-865Mhz
863-865Mhz
863-865Mhz
Frequency response
50Hz-18kHz
50Hz-18kHz
50Hz-18Khz
Signal/Noise ratio
> 85dB
> 85dB
> 85dB
Class 1
1
1
Rated voltage
AC220~240V 50Hz
AC220~240V 50Hz
AC220~240V 50Hz
Adapter
13-15V DC / 500mA
13-15V DC / 300mA
13-15V DC / 300mA
Dimensions per unit
210 x 145 x 42 mm
210 x 145 x 42 mm
210 x 145 x 42 mm
Bodypack STB4
Handheld STM4
Ref.nr: 179.203B
179.206H
Frequency range
863-865Mhz
863-865Mhz
Battery
2x 1.5V AA Battery
2x 1.5V AA Battery
RF output
>10dBm
>10dBm
Class 1
1
Dimensions per unit
100 x 65 x 30 mm
238 x 50 x 50 mm
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior
notice.
Class I product for use in Frequency band 863-865MHz.