VonShef.com
BEFORE FIRST USE
Before using this appliance for the first time, please ensure you complete the following
steps:
•
Carefully unpack the 3 in 1 Snack Maker and
remove all packaging materials including any
stickers or labels.
•
Clean the PLATES using a damp cloth or sponge
and mild detergent. Wipe dry with a soft dry
cloth.
•
Clean the MAIN UNIT of the appliance with a
damp cloth or sponge.
WARNING! Never immerse the MAIN UNIT in
water or any other liquid.
•
Position the Snack Maker on a dry, level and
heat-resistant surface.
NOTE: When using the Snack Maker for the
first time, it may emit slight smoke or odour
whilst any production residue burns off. This
is completely normal and should disappear
after a few minutes. However, as it may affect
the flavour of your first batch made, it is
recommended that you pre-heat the appliance,
switch off and allow to cool.
•
For best results, lightly coat the PLATES with a
little cooking oil or cooking spray.
FITTING & REMOVING THE PLATES
•
Select your desired PLATES to be fitted.
•
Align the lip on one side of the PLATE with the black hinges of the Snack Maker and firmly push down
until it clicks into place.
IMPORTANT: Ensure BOTH PLATES are correctly fitted before switching on the appliance. DO NOT mix
PLATES.
•
To remove the PLATES, simply press the corresponding PLATE RELEASE BUTTON located next to the
HANDLE LOCKING CLIP and the bottom section of the MAIN UNIT.
WARNING! Always allow the PLATES to completely cool before removing them from the MAIN UNIT.
CLICK
VonShef.com
