vonRoll hydro LEAKPEN, Operating Instructions Manual

Page: 9 / 22

9
Components/scope of delivery
Device overview
1
Connection socket for headphones and
leakage LED
2
Fastening eye for lanyard
3 Display
4
button
5
button (increases volume)
6 ON/OFF button (mute)
7
button (reduces volume)
8 button
9
Tip of the measurement device =
screws into battery compartment
10 Rating plate 1
11 Rating plate 2
Scope of delivery
21 LEAKPEN device case
22 LEAKPEN hand-held device
23 Lanyard
24 Wireless and wired headphones
25 Magnetic adapter (short)
26 2 x LR6 alkaline batteries
27 Magnetic adapter (long)
28 Adapter tip
29 Power supply (for charging the head-
phones battery) or 230 V AC charger
Operating instructions
12 V DC motor vehicle charger
Charging cable
Audio cable for headphones
Protective stopper for jack socket
Display (see picture A)
31 Noise level (numerical)
32 Noise level (bar)
33 Hearing protection active
33 and 34 Mute
35 High-pass filter active
36 Low-pass filter active
37 Battery charge level indicator
Rating plate
The following information can be
found on the rating plates (10 and 11):
–
Type of measurement device
–
Serial number
–
Operating voltage
–
Typical current consumption
–
Information about the batteries
–
Manufacturer data
Transport inspection
The measurement device is supplied
as standard with the components
specified in the section entitled
„Scope of delivery“.
INFORMATION
►
Check that the delivery is com-
plete and free from visible dam-
age. Contact your dealer/suppli-
er immediately if your delivery is
incomplete or damaged.