EN
5
WWW.VONROC.COM
3. Locking screw
4. Support bar
5. Tube clamp
6. Locking screw
7. Tripod stand
8. Cable splitter
9. Screw
4. OPERATION
Be sure to keep a minimal distance of 0.5m
between the lights (1) and any illuminated
objects.
Objects that are placed too closely
may overheat.
Do not connect the fl ood light to external
dimmers of any kind.
The fl ood light is not
suitable for use in combination with
external dimmers. Using an external
dimmer can cause irreparable damage to
the fl ood light and/or the dimmer circuit.
Only connect the fl ood light to a regular
220-240V~ 50Hz outlet.
Adjustment (Fig F-1, F-2)
The lights can be directed in any orientation.
To adjust the orientation of the lights, take the
following steps:
1)
Slightly loosen the applicable locking screw(s)
(2)/(3).
2) Adjust the light(s) (1) to the desired orientation.
3) Re-tighten the locking screw(s) (2)/(3).
Be careful when touching the lights.
The
metal housing of the lights may become hot
during operation. Disconnect the fl ood light
from mains power and allow it to cool down
suffi ciently before making any adjustments.
The height of the tripod stand can be adjusted. To
adjust the height, take the following steps:
1) Slightly loosen the tube clamp(s) (5).
2)
Adjust the tripod stand to the desired height by
extending or retracting the tube.
3) Re-tighten the tube clamp(s) (5).
5. MAINTENANCE
The fl ood light is maintenance-free and only
requires occasional exterior cleaning.
Do not open the housing of the lights, there
is a risk of electric shock.
The fl ood light
does not contain any serviceable parts.
Malfunctioning lights must be disposed of.
Replace the lights in case the glass
covers become damaged.
Damaged
lights can not be repaired and must
be disposed of.
The LED light source is not replaceable.
When the LED light source has reached the
end of its life the light must be disposed of.
Cleaning
Disconnect the fl ood light from mains power and
allow it to cool down suffi ciently before cleaning.
Do not use any solvents, caustic cleaning products
or similar chemicals. Use a dry or damp cloth for
cleaning.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
