VONROC WL504AC, Original Instructions Manual

Page: 4 / 28

4
EN
WWW.VONROC.COM
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fi re and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance
of the instructions in this manual.
Risk of electric shock.
Not suitable for applications with external
dimmers.
Minimal distance between the light source
and illuminated objects.
Protection class IP65.
Replace damaged glass covers.
Do not dispose of the product in unsuitable
containers.
The product is in accordance with the
applicable safety standards in the European
directives.
SAFETY WARNINGS FOR WORK LIGHT
a) Please read and observe all safety warnings
and instructions enclosed with the work light.
b) Do not use the work light in hazardous areas.
c) Do not direct the light beam at persons or
animals and do not stare into the light beam
yourself (not even from a distance).
d) Do not cover off the lens while operating the
work light.
The work light heats up during
operation and can cause burns when the heat is
allowed to accumulate.
e) Do not allow children to use the work light.
It is intended for professional use. Children
can unintentionally blind themselves or other
persons.
2. MACHINE INFORMATION
Intended use
The foldable work light is intended as mobile
illumination for temporary use and is not suitable
for permanent room lighting.
TECHNICAL SPECIFICATIONS
Model No. WL504AC WL505AC WL506AC
Input 220-240V~ 50Hz
Power 30W 50W 100W
Luminous fl ux 2700lm 4500lm 9000lm
Beam angle 120°
CRI >80
Ingress protection IP65
Weight 1.2kg 1.5kg 2.4kg
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. LED light
2. Locking knobs
3. OPERATION
Be sure to keep a minimal distance of 0.5m
between the lights (1) and any illuminated
objects.
Objects that are placed too closely
may overheat.
Do not connect the work light to external
dimmers of any kind.
The work light is not
suitable for use in combination with
external dimmers. Using an external
dimmer can cause irreparable damage to
the work light and/or the dimmer circuit.
Only connect the work light to a regular
220-240V~ 50Hz outlet.
Unfolding / Adjustment (Fig. D)
To unfold the work light, or to adjust the orientation
of the work light, take the following steps:
1)
Slightly loosen the locking knobs (2).
2) Adjust the light (1) to the desired orientation.
3) Re-tighten the locking knobs (2).