EN
7
WWW.VONROC.COM
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
2
. If you use an extension
cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
The machine is intended for driving in and loose-
ning screws and bolts as well as for tightening and
loosening nuts whilst adhering to the technical
data. Main purpose environment is in the automo-
tive sector, for metal construction or roofing work.
The device is not intended for drilling.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Model No.
Batteries
included
Chargers
included
IW501DC
-
-
S_ IW501DC
CD801AA
CD802AA
S2_ IW501DC
2 x CD801AA
CD802AA
S3_ IW501DC
CD803AA
CD802AA
Machine information
Rated voltage
20V
No load speed
0-2200/min
No load impact rate
0-3000/min
Chuck
3/8” square chuck
Max. torque
150 Nm
Weight
1.2 kg
Sound pressure level L
PA
93.8 dB(A) K=3 dB(A)
Sound power level L
WA
104.8 dB(A), K=3dB(A)
Vibration
11.15 m/s² K=1.5 m/s²
Model No.
CD801AA
Battery Type
Lithium-Ion
Voltage
20V
Capacity
2.0 Ah
Recommended charger
CD802AA
Weight
0.3 kg
Model No.
CD802AA
Charger input
220-240V, 50Hz 0.4A
Charger output
21V
2.5A
Charging time 2Ah battery
60 minutes
Charging time 4Ah battery
120 minutes
Recommended batteries
CD801AA, CD803AA
Weight
0.36 kg
Model No.
CD803AA
Battery Type
Lithium-Ion
Voltage
20V
Capacity
4.0 Ah
Recommended charger
CD802AA
Weight
0.65 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
