VONROC 8717479095360, Original Instructions Manual, Page: 13 / 162

EN
13
WWW.VONROC.COM
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
2
. If you use an extension
cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
This product is designed for lawnmowing in domestic
environments. The lawn mower is intended for pri-
vate gardens at home. The lawn mower may not be
used to trim bushes, hedges or shrubs, to cut scaling
vegetation, planted roofs, or balcony-grown grass,
to clean (vacuum) dirt and debris off walkways, or to
chop up tree or hedge clippings. Moreover, the lawn
mower may not be used as a power cultivator to level
out high areas such as molehills. The equipment is
to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse.
TECHNICAL SPECIFICATIONS
MACHINE
Model No.
S4_LM505DC
Voltage 40V (2 x 20V)
No load speed 3500/min
Cutting width 380 mm
Cutting height 35/45/55/65mm
Grass box capacity 45 L
Weight 16,5 kg
Protection level IPX1
Sound pressure level (Lpa) 80.8dB(A), K=3dB(A)
Sound power level (Lwa) 91.4dB(A), K=2.29dB(A)
Vibration value <2.5m/s², K=1.5m/s²
BATTERY
Model No.
CD803AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 4.0 Ah
Recommended charger CD802AA, CD820AA
Weight 0.65 kg
CHARGER
Model No. CD802AA
Charger input 220-240V, 50Hz 0.4A
Charger output 21V 2.5A
Charging time 2Ah battery 60 minutes
Charging time 4Ah battery 120 minutes
Recommended batteries CD801AA, CD803AA
Weight 0.36 kg
Model No. CD820AA
Charger input
220-240V, 50-60Hz,
200W
Charger output 21V 2.3A, <3.8A
Charging time 2Ah battery 45 minutes
Charging time 4Ah battery 85 minutes
Recommended batteries CD801AA, CD803AA
Weight 0.81 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other
batteries could cause serious injury or damage the
tool.
CD803AA 20V, 4Ah Lithium-Ion
The following chargers can be used to charge
these batteries.
CD802AA Quick charger
CD820AA Dual quick charger
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 60335-1 and
EN 60335-2-77; it may be used to compare one
tool with another and as a preliminary assessment
of exposure to vibration when using the tool for the
applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.