A5P | 01
OPERATION
To begin charging
1. Take the charging cable and insert the plug into a
suitable power supply outlet.
2. Remove the protective cap and fully insert the
charging connector into the charging port ensuring the
connector is secure.
3. The charger will automatcaily begin charging the red
LED will be illumanted and the green LED will flash.
NOTE: If charging does not begin automatically and the
LED sequence is not as indicated as above refer to the
Staus LED Meaning.
LED State
Fault Yellow
State Green
Charge Red
Ready
Off
On
Off
EV Connector
Off
Slow Flash
Off
CP Error
Off
Fast Flash
Off
Charging
Off
Pulsing
On
Charge Complete
Off
Off
Off
Fault
Flash
On
Off
STATUS LED MEANING
To end charging
1. Disconnect the plug from the power supply outlet.
2. Disconnect the charging connector from the
vehicle.
3. Close the proctecvtive cover on the vheicle, and place
the protective cap onto the charging connector.
0.000KWh
00:00:00
0.0A 0.00KW
230V
24ºc
Tempreture
Electricity Consumption
Power
Constant Current
Charging Time
Rated Current
Voltage
Display Screen
