VonHaus 3500073, Instruction Manual

Page: 3 / 20

1. REMOVE SIDE PANEL 2. REMOVE CHEST
3. CHEST DRAWERS
5. CASTER ASSEMBLY
6. HOOK ASSEMBLY
Place the TOOL CHEST on a level surface and remove the
TOOL BOX from the TOOL CHEST.
Remove SCREWS with a SCREWDRIVER (not supplied).
ASSEMBLY
If CASTER assembly is loose, using a screwdriver slightly spread
apart the split bearing on the shaft. If CASTER is tight, crimp
split bearing with pliers. Make only small adjustments until
CASTER fits. The HOOKS provided can be fitted into the side of the TOOL
CHEST. These can be used to store hanging tools.
4. HANDLE ASSEMBLY
Open the TOOL CHEST lid and remove the bars to access the
drawers. The bars can be replaced to stop the drawers opening if
you choose to store this inside the TOOL BOX.
Insert the handle into the two slots and fix into place with
the BOLTS provided using an ADJUSTABLE WRENCH (not
supplied).
EN