TROUBLESHOOTING
PROBLEM
SOLUTION
Remove the plug from the mains and reinsert.
Check that all components are securely connected.
Check that the HEPA Filter is securely in place.
Ensure that it is pressed against the small white
button and that it is fully pressed inwards.
VACUUM WILL NOT START.
LOSS OF SUCTION.
CAUTION:
Before attempting troubleshooting, power off the appliance and disconnect from the plug socket.
If you are having difficulty using your product and require support, please contact
5
Check the Flexible Hose, Metal Tube, Debris
Attachment, Fabric and HEPA Filters and openings
for any obstructions and remove.
Remove and empty the Fabric Filter.
Clean the Fabric and HEPA Filter (see the ‘
Cleaning
the Filters’
section on the previous page).
Check that all components are securely connected.
Ensure the Debris Attachment is fitted before
cleaning up large clumps of debris. This should
prevent any possible blockages from happening.
VACUUM CUTS OUT.
Thermal cut-out has activated. Empty the tank,
remove any blockages and/or clean the Filters.
The appliance will become operational again after
allowing
30-60 minutes
for it to cool down.
Summary of Contents for 3500060
Page 1: ...15L ASH VACUUM 3500060 Instruction Manual 01 0818...
Page 3: ......
