CLEANING & MAINTENANCE
Remove the plug from the mains socket before
carrying out any adjustment, servicing or
maintenance.
Always store the power tool in a dry place.
If the supply cord is damaged, it must be replaced by
a qualified service technician.
Keep the ventilation slots and motor housing as free
of dirt and dust as possible.
Clean the unit by rubbing it with a clean cloth and
blow it clean using low-pressure compressed air is
recommended.
Before performing any assembly, cleaning or maintenance tasks, always ensure the powertool is
switched off and is disconnected from the mains supply
ATTENTION
It is recommended that
you always clean the unit immediately
after using it. Clean the mixer regularly
by rubbing it with a damp cloth and soft
soap.
Do not use cleaners or solvents; these
may damage the surface finish of the
mixer.
Ensure liquids do not get into the inside
of the unit.
9
If you are having difficulty using this product and require support,
please contact
