CARBON BRUSH REPLACEMENT
Before performing any assembly, cleaning or maintenance tasks, always ensure the powertool is
switched off and is disconnected from the mains supply
If excessive sparking occurs you may have to replace
the carbon brushes.
Locate the
CARBON BRUSH CAP (10)
at the top of
the mixer, either side of the ventilation slots.
Using a flat head screwdriver, rotate the
CARBON
BRUSH CAP (10)
in an anticlockwise direction to
open.
Replace the Carbon Brush.
Screw the
CARBON BRUSH CAP (10)
in a clockwise
direction to secure.
10
NOTE
The Carbon Brush size is 7x13x18mm
