WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
are also protected.
Always wear eye protection. Any power
tool can throw foreign objects into your
eyes and cause permanent eye damage.
Always wear safety goggles (not glasses)
that comply with ANSI safety standard
Z87.1. Everyday glasses have only impact-
resistant lenses. They are not safety
glasses.
WARNING!
Wearing glasses or goggles
NOT
in compliance with ANSI Z87.1 when
operating this tool could cause serious
injury.
Dress appropriately. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts to prevent them from becoming
caught in the tool.
Remove any adjusting key or wrench
before turning the power tool on. A
wrench or key left attached to a rotating
part of the power tool may result in
personal injury.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure that these are connected and
properly used to reduce dust-related
hazards.
Use clamps, or another practical way,
to secure and support the workpiece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
Make sure there are no nails or foreign
objects in the path of the workpiece to be
cut or sanded.
Be aware of hidden hazards, before
cutting into walls, floors or ceilings, check
for the location of wiring and pipes.
Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to the power source and/
or battery pack, picking up or carrying
the tool. Carrying power tools with
your finger on the switch or energising
power tools that are switched on invites
accidents.
POWER TOOL USE AND CARE.
Use the power tool, accessories and
Router Bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
WARNING!
Use only accessories
recommended for this 1600W Router.
Follow the instructions that accompany
the accessories. The use of improper
accessories may result in injury to the
operator or damage the tool.
Do not use the power tool if the switch
does not turn it on and off. A power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
Hold the power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. A cutting
accessory contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
Keep hands away from cutting area.
Never reach underneath a work piece
for any reason. Do not insert fingers or
thumb into the vicinity of the accessory/
sanding attachments. Do not force the
power tool. Use the correct power tool
for your application. The correct power
tool will do the job better and safer at the
rate for which it was designed.
Do not overreach. Keep proper footing
and balance at all times. This will enable
better control of the power tool in
