4
ASSEMBLY
5.
Position the Heater Head
(I)
onto the end of the
Extending Pole
(K)
and lock into place with the Heater
Head Locking Bolt
(D).
Turn clockwise to secure.
I
K
5
I
D
6
45°
POWER CORD
1
2
3
650W -
For the
lowest
heat setting,
pull the cord once.
1350W -
Pull the
cord a second time
for the
medium
heat
setting.
2000W -
For the
maximum
heat
setting, pull the cord
3 times.
To switch the Patio Heater off, simply pull the
cord until the indicator reaches ’0’.
NOTE:
Once the Patio Heater has been plugged in and
a heat setting has been selected, it may take some time
for the bulbs to illuminate and heat. This is completely
normal and is not a fault with the product.
WARNING!
Do not touch any part of the Heater Head
once powered on. Surfaces will become extremely hot.
6
. Before plugging in the Patio Heater, adjust the
angle of the Heater Head
(I)
by unscrewing the nut on
the side (circled). Slightly pull the Heater Head forward
or push it back to the angle preferred. Tighten to
secure in the desired position.
