ASSEMBLY
1
2
1.
Secure the Base Plate
(O)
to the Base Weight
(P)
using a screwdriver (not supplied) and the 3 Base
Screws
(A).
3.
Place the Base Cap
(H)
over the Lower Pole
(N)
to enclose the Base Screws
(A)
and keep them
weatherproof.
Using 4 M5X8 Screws
(B),
attach the Central Pole
(M)
to the Lower Pole
(N)
by aligning the 4 holes. Ensure
the Screws are tightened for stability.
Slide the Cable Clip
(E)
over the Central Pole
(M)
and
position at the required height before tightening the
small screw to secure in place.
O
A
P
N
F
H
M
B
L
K
3
4
E
G
2.
Once securely tightened, turn over the assembled Base
Plate/Base Weight
(O,P)
and attach the Lower Pole
(N)
using the Torque Screw
(C)
and Base Washer
(F).
Turn
clockwise to secure.
IMPORTANT:
Ensure the Lower Pole
(N)
is adjusted so that
the larger holes align with the heads of the Base Screws
(A).
4.
Insert the Extending Pole
(K)
into the Top Pole
(L),
making sure that the end appears through the threaded
ring. Screw on the Extending Lock
(G).
NOTE:
Do not overtighten as this may damage the thread.
Attach the assembled components
(K,L,G)
to the Central
Pole
(M)
using the 4 remaining M5X8 Screws
(B).
