background image

A5P | 01

CAUTION:

 Switch off the Radiator and 

disconnect the from the power socket. 

Wait for the Radiator to cool completely 

before cleaning.
Vacuum-clean the Vents to remove dust 

from these areas.
To remove dust on external surfaces, wipe 

the Radiator with a damp (not wet) lint-free 

cloth rinsed in hot soapy water only. 
CAUTION: Do not use any harsh detergent 

or abrasive cleaners.
WARNING! Do not spray with liquids or 

submerge in any liquid or water.
WARNING! Do not attempt to clean the 

inside of the Radiator. Do not attempt to 

open the casing at any time. There are no 

user-serviceable parts.  

SAFETY FEATURES

MAINTENANCE

This Radiator is fitted with an overheat 

protection switch (thermal cut-out) which 

will power off the appliance automatically 

in case of overheating. Should this occur, 

unplug the appliance and allow to cool fully 

for approximately 30 minutes.

Follow the operation instructions to restart 

the appliance after removing the source 

of the overheating (poor ventilation, item 

covering the Radiator etc.). The Radiator 

should function normally. Should the 

problem persist, please contact DOMU 

Brands Customer Services. 

To avoid damage and to regulate the 

temperature, this Radiator is fitted with 

a thermostatic safety device. The safety 

device will activate and cut out the power 

to the Radiator once a certain temperature 

is reached. The Radiator will start again 

once the temperature has lowered. 

The Radiator is also fitted with a tip switch 

which will cut off the power to the Radiator 

if it is knocked over. Should this happen, 

disconnect at the mains and allow to 

cool fully before attempting to move the 

Radiator. Inspect the Radiator for damage. 

If - and only if - the Radiator is free from 

damage, plug back into the mains. The 

Radiator should function normally. 

Summary of Contents for 2500645











Reviews: