A5P | 01
OPERATION
Move the Switch to the ON position, the display will
read 00.
Pre heat the blanket 30-60 minuets before use, press
the ‘High’ button this will display a H on the control and
the timer will display 9.
After 30/60 minuets the display will show L1, the throw
is now on low.
Pressing the Temp button will cycle through temperature
settings from 1-7 and L being Low.
Pressing the Time button will cycle through hours 1-9
once the time has elapsed the throw will power off.
NOTE: if the display shows P check the connection of
the throw and power cable. Unplug and re-insert the
connection checking its connected correctly, if this
persists after checking the connections please contact
customer service.
NOTE: if the display shows E the circuit has become
damaged. Contact customer services.
WARNING! If using the blanket while sleeping ensure it
is set on low heat.
WARNING! Do not use the blanket against bare skin
Lift to release
Temp
Time
High
ON
OFF
H
POWER CONNECTION ASSEMBLY
Hour
Heat Level
