1.
Slide the switch to the position shown. You will
now be able to set the Timer Dial
(3).
NOTE:
Do not unplug the Radiator once you have set
the Timer Dial as this can cause the clock to stop.
IMPORTANT:
The switch must be set to the ‘I’
position for normal operation. (NON TIMED)
2.
To set the time of day, turn the Timer Dial
clockwise (indicated by the direction arrow) until the
marker arrow corresponds to the time of day.
NOTE:
The Dial will only rotate clockwise, if you
accidently pass the time required you will need to
rotate the timer again.
3. Using your finger or a tip of a pen/pencil, push
segments in as required. Each segment is 15 mins.
You can select as many or as little heating periods as
desired within the 24 hour period.
USING THE TIMER
Pin Out.
Time set.
Pin In.
Time not
set.
