VONETS
——
WiFi Bridge/Repeater/Router
10
The Ethernet port of VONETS device defaults to WAN port, the Ethernet cable defaults to
LAN port, i
f the interface mode is changed to “WAN/LAN exchange”, the Ethernet cable will
be WAN port and the Ethernet port will be LAN port.(This option can keep unchanged);
3.2.2 WAN Port connection method
By setting the WAN port of the router, you can change the network connection type
according to the actual needs of the individual, there are three types of WAN port
connections commonly used in the routing mode of VONETS device: DHCP(Auto Config),
PPPoE(ADSL) and WiFi. DHCP and PPPoE are wired connections, and the WAN port
needs to be connected to the source network through a wired connection:
⚫
DHCP(Auto Config): WAN port connection type is selected as
“DHCP(Auto Config)”
,
VONETS device will automatically obtain IP address from source network;
⚫
PPPoE(ADSL): WAN port connection type is selected as
“PPPoE”
, that is, ADSL virtual
dialing mode requires ISP (Internet Service Provider) to provide Internet account and
password;
⚫
WiFi: WAN port connection type is selected as
“WiFi”
, VONETS device uses a built-in
WiFi network card (used to connect to the source hotspot) as a WAN port, and all
Ethernet ports as LAN ports, while providing WiFi hotspot functions.
3.2.3 WAN port wired connect network
——DHCP
The default WAN port connection method of VONETS device is DHCP. WAN port can
automatically obtain an IP address after connecting to the source network.
