6 of 16
4
MOUNT DEVICE ON DOOR
5
ROUTE TWO WIRES FROM QEL EXIT DEVICE TO POWER SUPPLY
a. Mount device on door using supplied mounting screws (Figure 4-1).
b. Center device in pocket, leaving an even gap all around the device.
c. If outside trim is used, bolt through to trim (see Figure 4-2 and trim installation instructions).
PS900-Series Power Supply
with 900-2RS, 900-4R, or
900-4RL Option Board
18 AWG required
Maximum distance = 200'
QEL INPACT
Exit Device
Electric Power
Transfer
Voltage:
1.4 A inrush (0.5 sec)
Current:
0.14 A holding
2.0 A calibrate (3 sec, one time)
QEL Electrical Load
QEL Cable
⁵⁄₁₆
" pan head
machine screws
(quantity: 4)
⁵⁄₁₆
" pan head
machine screws
(quantity: 2)
Figure 4-1
Figure 4-2
Distance
(one way)
Wire Gauge
200’
18AWG
320’
16AWG
500’
14AWG
800’
12AWG
