3 of 16
GENERAL INFORMATION
SPECIFICATIONS
TOOLS NEEDED
The QEL94/9547 Exit Device is designed to provide reduced pushpad projection and a unique appearance by embedding
the device into the face of the door.
These instructions assume that a factory-prepared door and frame are being used.
Before starting installation, review "Warnings," "Parts," "Specifications," and "Tools Needed."
Mechanical
• Vertical rods adjustable for doors 6'8" to 8' tall
• Rods for 10' doors are available upon request
• Pushpad projection (depressed) 1
¹⁄₈
" to 1
¹⁄₄
"
Electrical Load
• Voltage: 1.4 A inrush (0.5 sec)
• Current: 0.14 A holding
2.0 A calibrate (3 sec, one time)
These are the tools needed for installing a QEL94/9547 into a factory-prepared door and frame.
¹⁄₂
" drill bit
⁷⁄₆₄
" hex key
Phillips screwdriver
Hammer
