9
26
Slide Lower Cable / Bottom Latch Assembly Thru
Bottom Latch Housing and into Bottom Door
Pocket.
For 2-Point Latch Only
NOTE:
Confirm bottom latch is in
correct orientation before proceeding.
!
27
Insert Latch Adjustment Pin to Hold Bottom Latch
in Place.
For 2-Point Latch Only
Bottom
Holes should face
push side of door
24
Install End Cap Bracket and End Cap.
#10 x 1
¹⁄₄
" Wood screw
(Surface mount WDC)
#10-24 x
³⁄₄
"
(Sex bolts, 1
³⁄₄
" door)
#10-24 x 1
¹⁄₈
"
(Sex bolts, 2
¹⁄₄
" door)
25
Install Bottom Latch Mounting Bracket Assembly
to Bottom of Door with 3 Screws.
For 2-Point Latch Only
Push Side
of Door
RHR shown
NOTE:
Confirm correct orientation of
assembly before proceeding. Open side
of housing should face pull side of door.
!
Pin must go thru
both sides of
bracket
Bottom edge of latch
housing should be flush
with bottom of door (for
³⁄₈
" standard undercut)
Squeeze tabs on
cap, then insert pin
Assemble pin
a
b
