Volvo XC 60 TWIN ENGINE, Owner'S Manual

Page: 300 / 620

DRIVER SUPPORT
* Option/accessory. 298
Deactivating/activating the Adaptive
cruise control
*
The Adaptive cruise control (ACC
37
) can be
temporarily deactivated so that it is set in the
standby mode and can later be reactivated.
Deactivate Adaptive Cruise Control and
set it in standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
To temporarily switch off Adaptive Cruise Control
and set it in standby mode:
–
Press the steering wheel button (2).
> The
symbol on the driver display
changes colour from WHITE to GREY and
the stored speed in the centre of the
speedometer changes from BEIGE to
GREY.
WARNING
•
With the adaptive cruise control is in
standby mode, the driver must intervene
and regulate both speed and distance to
the vehicle ahead.
•
When the adaptive cruise control is in
standby mode and the car comes too close
to a vehicle ahead, the driver is warned of
the short distance by the Distance Warn-
ing function instead.
Standby mode on driver intervention
The Adaptive cruise control is temporarily deacti-
vated and set in standby mode if:
•
the foot brake is used
•
the gear selector is moved to N position.
•
the driver maintains a speed higher than the
stored speed for longer than 1 minute.
•
the clutch pedal is depressed for approx. 1
minute - applies to cars with manual gearbox.
A temporary increase in speed with the accelera-
tor pedal, e.g. during overtaking, does not affect
the setting - the car returns to the last stored
speed when the accelerator pedal is released.
37 Adaptive Cruise Control