40
Using the Cassette Player
Cassette Select
Model VR 100
Insert a cassette into the radio and it will
automatically begin to play. “TAPE_A” or
“TAPE_B” is displayed, depending on which
side of the tape is playing.
Model VR 200 and VR 400
Ensure a cassette is inserted. Press the
MODE button until “CASS” is displayed.
“TAPE_A” or “TAPE_B” is displayed,
depending on which side of the tape is
playing. If no cassette is loaded when
pressing the MODE button, the radio will
display “NO TAPE” and return to FM mode.
Cassette Tightening
and Error Detection
(VR 200 and VR 400)
Each time a cassette is inserted into the
radio, the player automatically checks for a
loosely wound tape and tightens it before
playing. The player also detects tapes that
are too tightly wound or broken. If a tightly
wound or bad tape is detected, BAD TAPE is
displayed and the tape is ejected.
The Cassette Tightening and Error Detection
feature may prevent cleaning cassettes from
working properly. To use cleaning cassettes,
you can override the error detection.
If a cleaning tape is rejected;
With the radio OFF and the ignition ON,
Press and hold TUNE for 5 seconds until
“BAD TAPE” and “DETECT OFF” display.
Insert the cleaning tape.
