Group 170
Preventive Maintenance
55
Check Sealing of Rear Axle and Hub Re-
duction Gear
Note: For further information refer to literature in Func-
tion Group 7.
To perform a check of the Sealing on the Rear Axle and
Hub Reduction Gear complete the following:
1
On the Rear Axle, inspect around the mating sur-
faces for leaks past the gasket.
2
Check brake chamber and air tubing condition.
3
Check Hub Reduction Gear for any leaks or cracked
sealant.
56
Check Bearing Clearance in Pinion and
Rear Axle Input Shaft
Note: For further information refer to literature in Func-
tion Group 7.
To perform a check of the Bearing Clearance in the Pin-
ion and Rear Axle complete the following:
1
Use a dial indicator to check bearing clearance in
the Pinion and Rear Axles. The clearance should be
within 0.04 to 0.12 mm (0.001 to 0.005 in.).
80
Summary of Contents for VHD
Page 4: ...2 ...
Page 10: ...8 ...
Page 24: ...22 ...
Page 35: ...Group 170 Preventive Maintenance Comments 33 ...