Volvo V90 - ACCESSORY PANEL, Quick Manual

Page: 18 / 42

LEFT-HAND STALK SWITCH
Headlamp functions
are controlled using the left-hand stalk switch.
If you select
AUTO
mode, the car detects when it is dark/light and the
lighting is set accordingly, e.g. when evening falls or when you drive into
a tunnel. You can also turn the stalk switch's thumbwheel to for
main beam, which is dimmed automatically for oncoming traffic. Manual
main beam is activated by moving the stalk switch away from you.
Deactivate by moving the stalk switch towards you.
Active bending lights
*
are designed to provide maximum lighting in
bends and at junctions by means of the light following steering wheel
movements. The function is activated automatically when the car is
started and can be deactivated in the centre display's function view.
Approach lighting
switches on the outside lighting when you unlock
the car with the key, and helps you to reach the car safely in the dark.
Home safe lighting
lights up part of the exterior lighting after you
have locked the car in order to give you some light in the dark. Activate
the function after you have switched off the car by moving the left stalk
switch towards the instrument panel and then releasing it. The time for
how long the home safe lighting should remain switched on can be set
via the centre display.
Resetting the trip meter
Reset all information in the manual trip meter (TM) with a long press on
the
RESET
button. A short press only resets the mileage. Trip meter,
automatic (TA), is reset automatically when the car has not been used
for 4 hours.
02