Volvo S60 inscription, Owner'S Manual Supplement, Page: 79 / 170

PRACTICAL INFORMATION
}}
77
Changing a wheel – installing a
wheel
It is important to re-install wheels properly.
Re-installing the wheel
1. Clean the contact surfaces on the wheel and
hub.
2. Lift the wheel and place it on the hub.
Tighten the wheel nuts
3. Install the wheel nuts and tighten hand-tight.
Using the lug wrench, tighten crosswise until
all nuts are snug.
4. Lower the vehicle to the ground and alter-
nately tighten the bolts crosswise to
103 ft. lbs. (140 Nm).
5. Press the plastic covers onto the wheel nuts
and Install the wheel cover (where applica-
ble). The opening in the wheel cover for the
tire's inflation valve must be positioned over
the valve.
Related information
•
Changing a wheel – spare wheel (p. 75)
•
Changing a wheel – removing wheel (p. 73)
Tire inflation – general information
Check tire inflation pressure regularly.
Inflation placard
G032521
Tire inflation placard
Tire inflation
See the tire inflation decal on the driver's door
opening. This decal indicates the designation of
the factory-mounted tires on your vehicle, as well
as load limits and inflation pressure.