Volvo S40 2008 S40 Owner'S Manual Download Page 58

Page: 58 / 239

02 Instruments and controls

Right-side steering wheel lever

Windshield wipers

A. Windshield/headlight washers

B. Rain sensor (option) - on/off, see

page 68

C. Thumb wheel

CAUTION

Use ample washer fluid when washing the windshield. The windshield should be thoroughly wet when the wipers

are in operation.

Before using the wipers, ice and snow should be removed from the windshield. Be sure the wiper blades are not

frozen in place.

Windshield wipers off

The windshield wipers are off when the lever is in position 0.

Manual wiper function

From position 0, move the lever upward. The windshield wipers will sweep one stroke at a time for as long as the lever
is held up.

Intermittent wiper function

With the lever in this position, you can set the wiper interval by moving the thumb wheel (C) upward to increase wiper
speed or downward to decrease the speed.

Continuous wiper function

The wipers operate at "normal" speed.

High speed wiper function.

Summary of Contents for S40 2008 S40
















































































































































































































































Search results

Summary of Contents for S40 2008 S40

Reviews:

Related manuals for S40 2008 S40

Brands by name

Popular brands

Volvo S40 2008 S40, Owner'S Manual

Search results

Summary of Contents for S40 2008 S40

Reviews:

Related manuals for S40 2008 S40

Brands by name

Popular brands