||
WHEELS AND TIRES
* Option/accessory, for more information, see Introduction.
458
Accessing the spare tire
1. Lift the rear edge of the trunk's floor.
2. Unscrew the retaining bolt.
3. Lift out the foam block holding the tools.
4. Lift out the spare tire.
Stowing a flat tire
1. Take out the package containing a wheel
bag from the foam block and put the wheel
in the bag.
2. Return the tools to the foam block and put
the foam block bag in the vehicle.
3. Tighten the foam block's retaining bolt and
lower the floor of the trunk.
4. Place the bag containing the wheel in the
trunk.
Related information
•
•
•
•
Checking tire inflation pressure (p. 454)
Wheel bolts
The wheel bolts hold the wheel in place.
Wheel bolts should be tightened to 103 ft.
lbs. (140 Nm). Over-tightening could damage
the threads.
Only use wheels/rims that have been tested and
approved by Volvo and are included in Volvo's
product range.
Use a torque wrench to check that the wheel
bolts are tightened correctly.
Never
lubricate the wheel bolts' threads.
Locking wheel bolts
*
A tool for removing locking wheel bolts can be
found in the foam block under the cargo com-
partment floor.
Related information
•
•
Summary of Contents for S 90
