Volvo S 90 2017, Owner'S Manual

Page: 483 / 570

WHEELS AND TIRES
}}
* Option/accessory. 481
CAUTION
•
After inflating the tires, always reinstall
the valve cap to help avoid damage to the
valve from dirt, gravel, etc.
•
Use plastic valve caps only. Metal caps
could corrode and become difficult to
remove.
Related information
•
Wheel bolts (p. 481)
•
Jack (p. 484)
Wheel bolts
The wheel bolts hold the wheel in place.
CAUTION
Wheel bolts should be tightened to 103 ft.
lbs. (140 Nm). Over-tightening could damage
the threads.
Only use wheels/rims that have been tested and
approved by Volvo and are included in Volvo's
product range.
Use a torque wrench to check that the wheel
bolts are tightened correctly.
Never
lubricate the wheel bolts' threads.
Locking wheel bolts *
A tool for removing locking wheel bolts can be
found in the foam block under the cargo com-
partment floor.
Related information
•
Changing tires (p. 478)
•
Installing a wheel (p. 480)
Spare tire
5
The spare tire
5
in your vehicle is called a
"Temporary Spare".
NOTE
•
The vehicle should never be driven
faster than 50 mph (80 km/h) when
the spare tire is being used.
•
The spare tire is only intended for tempo-
rary use. Replace it with a normal wheel
as soon as possible.
•
The vehicle's handling may be altered by
the use of the spare tire and ground
clearance will be reduced. Do not wash
the vehicle in an automatic car wash if
the Temporary Spare is being used.
•
Recommended tire pressure (see the
placard on the B-pillar) should be main-
tained irrespective of which position on
the vehicle the temporary spare tire is
used on.
•
In the event of damage to this tire, a new
one can be purchased from your Volvo
retailer.
5 Not available on all models.