Volvo S 90 2017, Owner'S Manual

Page: 145 / 570

INSTRUMENTS AND CONTROLS
* Option/accessory. 143
With the lighting ring in the 7 position
and the ignition in mode II or if the engine is
running
:
•
In the
US
: DRL will be
off
•
In
Canada
: DRL will be
on
With the lighting ring in the position:
•
DRL will be
on
(the low beam headlights will
automatically switch on in dark conditions)
US models only
: DRL can be deactivated in the
center display's Settings view.
With selected, a tunnel detection function
activates the low beams when the vehicle enters
a tunnel.
With the lighting ring in the position:
•
DRL will be
off
and the low beam headlights
will be
on
Active Bending Lights
*
Active Bending Lights (ABL) are designed to
help light up a curve according to movements of
the steering wheel.
Headlight pattern with the Active Bending Light function
deactivated (left) and activated (right)
ABL is activated automatically
8
when the engine
is started and the low beam headlights are on.
ABL can be deactivated in the center display.
If a fault is detected in the system, the
symbol in the instrument panel will illuminate. A
text message will be displayed and an additional
symbol will also illuminate.
NOTE
This function is only active in twilight or dark
conditions, and only when the vehicle is in
motion.
Deactivating/activating the function
ABL can be deactivated/activated in two ways in
the center display:
Via Function view
Tap the
Active Bending
Lights
button.
Via settings
1. Tap
Settings
in Top view.
2. Tap
My Car Lights and Lighting
Exterior Lights
.
3. Deselect/select
Active Bending Lights
.
Related information
•
Settings view (p. 170)
•
Front fog lights
*
(p. 144)
7 The parking lights will be on in this position, even if the ignition is switched off.
8 The factory default setting is on.