Volvo L45H 2016, Operator'S Manual, Page: 72 / 318

The oil flow adjustment knob (K) provides
adaptation of the max. demanded oil flow resp.
attachment speed to the roller control knob position
for both operating directions S and T.
When working for example with a grapple bucket,
the max. oil flow can easily be adjusted. The full
stroke of the roller control knob (S - T) is utilized for
sensitive control of the attachment.
NOTE! NOTE!
For safety reasons, the adjustment must only be
executed when attachment locking or Aux
hydraulics are operated.
1 Turn knob fully to the right (clockwise) to Min. Turn knob fully to the right (clockwise) to Min.
2 Operate Operate roller roller control control knob knob fully in fully in direction S or direction S or
T T and and simultaneously simultaneously increase oil increase oil flow flow by by turning turning
the knob counter-clockwise at the respective the knob counter-clockwise at the respective
engine speed.
engine speed.
Reduction of oil flow down to zero: Turn the knob
clockwise.
Increase of oil flow up to max.: Turn the knob
counter-clockwise.
Hydraulic emergency stop button (X) can be
pushed in to stop the movement of the attachment
or Aux hydraulics. To deactivate the emergency
stop, turn the button clockwise to release the
spring-loaded button.
Loader functions (control lever versions 1A Loader functions (control lever versions 1A
and 1B)
and 1B)
Neutral position: Not activated (spring-centred)
A Lowering
B Floating position (with detent function)
C Tilt back (with hold function, see page
80
)
D Tilting forward
E Lifting (with detent function, see page
81
)
70 70
Other controls Other controls
Controls Controls
www. duma -rent.com