Malfunctions
Group 30: Electrical system
20
Alarm display
1. Lube oil pressure: When the oil pressure falls
below a certain value at a certain engine speed,
the alarm lamp is lit.
2. Battery voltage: The alarm lamp lights up if the
alternator does not charge or if it overcharge.
3. Coolant temperature: When the coolant temper-
ature exceeds the alarm limit level, the alarm lamp
lights up.
4. Warning indication:The ”System Failure lamp”
will light up at short circuit, broken wire and AUX
failure.
For faults requiring immediate action or attention
by the operator. The buzzer will sound constantly.
5. Not used.
Symptom
Action
Alarm can not be acknowledged.
see section “Button panel fault”.
Charging problems.
see section “Battery warning” or
see section “Checking the charging system”.
Coolant alarm.
see section “Coolant temperature warning”.
Engine does not start.
see section “Start/preheat warning”.
(due to electrical conditions)
Fuel level warning.
see section “Fuel level warning”.
Glowing not activated.
see section “Start/preheat warning”.
No dimmer function.
see section “Button panel fault”.
No engine hours in the tachometer/display.
see section “Multi link fault”.
No engine revolution in the tachometer/display.
see section “Multi link fault”.
No multisensor data in the EVC display.
see section “Multi link fault”.
Oil pressure alarm.
see section “Oil pressure (engine) warning”.
On button does not power up the system.
see section “Button panel fault”.
Starter motor not activated.
see section “Start/preheat warning” or
see section “Checking the battery”.
Stop solenoid not activated.
see section “Stop solenoid” or
see section “Button panel fault”.
Malfunctions
2
1
3
4
5
https://www.boat-manuals.com/