manualshive.com logo in svg

Volvo A35E FS, Operator'S Manual

Share
Download
Volvo A35E FS Operator'S Manual Download Page 36

Instrument panels

34

Display unit

Setting time

1 Press the SETUP key.

2 Press the arrow down key to the time screen.

3 Press the select/acknowledge key.

4 Browse with the arrow keys to the required setting. (The setting 

procedure may at any time be interrupted with the ESC key.) 

24-hour display (13:20)

12-hour display (1:20)

5 Acknowledge with the select/acknowledge key.

6 Cursor is placed by hour. Set the hour(s) with the arrow keys.

7 Acknowledge with the select/acknowledge key.

8 Cursor is placed by minute. Set the minute(s) with the arrow 

keys.

9 Acknowledge with the select/acknowledge key.

Setting date

1 Press the SETUP key.

2 Press the arrow down key to the date screen.

3 Press the select/acknowledge key.

4 Browse with the arrow keys to the required setting. (The setting 

procedure may at any time be interrupted with the ESC key.) 

Year-Month-Day

Day-Month-Year

Month-Day-Year

5 Acknowledge with the select/acknowledge key.

6 Cursor is placed by Year. Set the year with the arrow keys.

7 Acknowledge with the select/acknowledge key.

8 Cursor is placed by Month. Set the month with the arrow keys.

9 Acknowledge with the select/acknowledge key.

10 Cursor is placed by Day. Set the day with the arrow keys.

11 Acknowledge with the select/acknowledge key.

Summary of Contents for A35E FS











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands