59A
IMG-273804
59B
IMG-273823
59C
IMG-273824
Note!
The adapter cable A was included in a previous version of the
kit for the parking camera.
The adapter cable B was included in a later version of the kit
for the parking camera.
Both versions are suitable for all cars.
Illustration A
Connect the previously routed cable harness connector (1) to
the right-hand connector on the control module.
Take the adapter cable A/B from the kit and connect the large
green connector to the socket on the control module, as
illustrated.
Connect the connector (2) on the pre-routed, taped cable
harness for the power supply under the left-hand tail lamp, to the
corresponding connector on the adapter cable.
Take the long remaining cable harness from the kit and connect
the end with the gray connector (3) to the connector in the
middle of the control module.
Clamp the adapter cable's remaining connector using the tie
strap from the kit.
Figure B shows adapter cable A
Figure C shows adapter cable B
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, camera, rear- 31428063 - V1.0
Page 34 / 57