12
IMG-254107
Use holesaw bit,
part.no 9997241 (Ø28.6 mm (1 1/8"))
, and
enlarge the hole.
File down the edges of the holes.
Remove any swarf.
Apply primer
part no. 9437350
around the hole edges and allow
to dry.
13
IMG-254108
Measure for making holes for the rubber grommets in the trunk
lid's front right-hand corner according to the diagram and mark
out the middle.
Pre-drill the hole using a
Ø3 mm (1/8")
bit.
Note!
Use a
5 mm (3/16 ")
drill stop.
Drill out the hole to
Ø8 mm (5/16 ")
and then to
Ø12 mm (15/32
")
to be able to insert the pull screw through for the hole making
tool.
Note!
Do not damage surrounding painted surfaces.
Remove any swarf.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, camera, rear- 31428063 - V1.0
Page 10 / 57