63
R3603578
Installing the cable harness
Take the new cable harness (purchased separately), marked A
in the kit image and place it behind the battery.
Pull the cable end with black 4-pin connector through the hole in
the rear edge of the right-hand cargo floor support, up to the
accessory electronic module (AEM). Route the other end in a
corresponding way to the fuse holder on the left-hand side.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, camera, XC90- 31270162 - V1.2
Page 35 / 64