14
IMG-265068
Take a sharp knife. First make a thin cut along the edges of the
inside of the template. This provides a groove to follow. Then cut
carefully out of the bumper covers.
Note!
Cut carefully. It is easy to slip with the knife and move outside
the template.
Remove the template.
Install the protective cover for the front engine block heater
socket from the kit. Check that it aligns. Adjust the hole using a
knife or file as necessary.
Smooth off the hole edges. Remove any swarf.
15
IMG-231564
Applies to all models
Press the protective cover (from the kit) into place in the hole cut
in the bumper cover.
Take the cable for the front engine block heater socket with
ground lead from the kit and thread them through the protective
cover.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V- 31269607 - V1.2
Page 11 / 25