
21A
M8504853
21B
M8504854
Note!
There are two types of mounting for the A-post panel nearest
the headlining - safety hooks or safety clips.
Illustration A
Illustration B
Detach the door sealing moulding (1) at the panel.
Pull the panel straight inwards into the car.
Lift up the panel.
Cut off the safety clip (2) illustration 18A or unhook the safety
hook (2) illustration 18B, depending on the version.
Note!
Ensure that the guide lugs on the panel do not scratch the
dashboard.
Turn the safety clip a quarter turn. Remove the safety clip.
22
M3904888
Take the mounting plate from the kit. Position the mounting plate
on the top end of the A-post panel, parallel with the top edge.
See the illustration. If the microphone is already installed in the
mounting plate, remove it. It is secured by two hooks on the long
sides.
Mark out and drill the holes for the mounting plate. Use a Ø3
mm (1/8") diameter drill bit.
Remove any swarf.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Hands free unit for carphone- 30730011 - V1.1
Page 18 / 45