WWW.MANUALS.WS
WWW.MANUALS.WS
1993 Volvo 240
Changing a wheel
Spare wheel, jack and tool kit are stowed in the trunk compartment. Make sure that the spare wheel is
secured. On the wagon models the jack and crank should be secured according to the above illustration
to avoid any disturbing rattle. Before raising the car with the jack be sure it is on firm and level ground.
Warning: Do not crawl or work under the car while it is raised by the
jack.
Removal
Steel wheel: Grasp the wheel cover with both hands and pull off.
Alloy wheel: Pry the center emblem off with a screwdriver. The wheelcover can then be removed by
hand.
Loosen the wheel nuts 1/2-1 turn with the box wrench provided in the tool kit. All of the wheel nuts
have right hand threads which are loosened by turning them counterclockwise.
Installation
Clean the contact surfaces on the wheel and hub. Lift the wheel and place it on the hub. Make sure that
you align the wheel with the guide stud on the wheel hub prior to installation. Install the wheel nuts
clockwise and tighten lightly. The bevelled side of each nut should face the wheel. Lower the vehicle to
the ground and alternately torque the nuts to 63 ft. lbs. (85 Nm).
Install the wheel cap.
file:///K|/ownersdocs/1993/1993_240/93240_94.html (5 of 7)12/30/2006 9:42:16 AM