||
03 Instruments and controls
03
74
*
Option/accessory, for more information, see Introduction.
Ignition mode I
–
With the remote key fully pressed into the
ignition slot
8
, press
START/STOP
ENGINE
briefly.
Ignition mode II
–
With the remote key fully pressed into the
ignition slot
8
, press
START/STOP
ENGINE
for approximately 2 seconds.
Returning to mode 0
To return to mode
0
from mode
II
or
I
, press
START/STOP ENGINE
briefly.
Starting and stopping the engine
See Starting the engine (p. 233) and Switch-
ing off the engine (p. 235) for information on
starting the engine and switching it off.
Emergency towing
See Towing the vehicle (p. 269) for important
information about the remote key when the
vehicle is being towed.
Related information
•
Inserting/removing remote key (p. 72)
Front seats
The front seats can be adjusted in a number
of ways to help provide the most comfortable
seating position.
Raise/lower the seat, pump up/down.
Front-rear adjustment: lift the bar and
move the seat to the position of your
choice.
Raise/lower front edge of seat cushion,
pump up/down.
Backrest tilt: turn the control to adjust the
angle of the backrest.
Electronic lumbar support*. Press the
button to adjust.
Control panel for power seat*, see Front
seats – power seat (p. 75).
WARNING
•
Do not adjust the seat while driving.
The seat should be adjusted so that
the brake pedal can be depressed
fully. In addition, position the seat as
far rearward as comfort and control
allow.
•
Check that the seat is securely locked
into position after adjusting.
Related information
•
Front seats – power seat (p. 75)
•
Rear seats – folding backrest (p. 80)
•
Rear seats – head restraints (p. 78)
8
Not necessary in vehicles with the optional keyless drive.
Summary of Contents for 2016 S 80
