Volvo 2009 XC90 Owner'S Manual Download Page 103 | Manualshive

Page: 103 / 282

background image

04 Interior

Rear seats

04

``

103

Entering the optional third row of seats

G027027

Tilting the outboard backrests in the
second row of seats:

•

Pull up the handle (1), hold it up, and tilt the
backrest forward to move the seat.

•

Return the backrest to the upright position
to slide the seat back to its original posi-
tion.

Forward/rearward seat adjustment

Lift the adjustment bar (2) to move the seat for-
ward or rearward.

Removing the center console (seven-
seat models only)

1

G027017

In order to make it possible to move the center
seat in the second row of seats as far forward
as possible (seven-seat models only), the rear
section of the center console can be removed.

•

Pull the handle (see illustration above) and
lift out the console.

•

To return the console to its original posi-
tion, slide it back into position until it clicks
into place.

G027033

Sliding center seat – second row (seven-
seat models only)

The center seat in the second row can be
moved farther forward than the outboard
seats. This makes it possible for a child seated
in this position to sit closer to the people in the
front seats.

1

The center console cannot be removed on vehicles equipped with the optional Rear Seat Entertainment System.

«
...
101
102
103
104
105
...
»

Summary of Contents for 2009 XC90



























































































































































































































































































Reviews:

No comments

Related manuals for 2009 XC90

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: Pivot Pages: 4

Brand: Mercedes-Benz Pages: 30

Brand: Actia Pages: 37

Brand: Uebler Pages: 56

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Impala Limited 2014

Brand: Chevrolet Pages: 356

Brand: tams elektronik Pages: 19

Brand: AIS Pages: 2

SANICON TURBO 300

Brand: Thetford Pages: 25

Brand: Mobridge Pages: 20

Brand: Hama Pages: 13

Brand: Ford Pages: 256

Brand: MayPole Pages: 3

Brand: Istar Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands