Volvo 164 1971, Instruction Book

Page: 48 / 65

Replacing the bulbs for the front turn
i ndicator flashers and the parking
lights
Remove the two Philips screws which
hold the glass. The bulbs can now be
removed by pressing them inwards and
then turning them a little anti-clockwise.
The inner bulb is for the parking light, the
outer for the flasher.
Replacing the bulbs for the rear turn
i ndicator flashers, parking lights, stop
lights and reversing lights
Remove the two Philips screws which hold
the glass. The bulbs can now be removed
by pressing them inwards and turning them
slightly anti-clockwise at the same time.
The top bulb is the flasher, the one under
that is the reversing light, the next one
under that the stop light and the one at the
bottom the rear light. Make sure that the
sealing strip fits well against the glass
when it is refitted.
Replacing the bulbs for the
license plate light
The two bulbs for the license plate light
are mounted on a holder located under the
l uggage compartment locking device.
Loosen the two screws which hold the
glass and remove it. The bulb is now
accessible for changing.
SERVICING
4 7